The Spaight Street Syndicate
The Spaight Street Syndicate Iceboat Shop
Daniel Hearn’s reports from his iceboat shop where DNs and most recently, a C Class Skeeter are built and tuned.
Daniel Hearn shares another installment on his C Skeeter build proving again that iceboating attracts creative types!
“Heavy Metal Lightweight”
“It’s a Bubble”
“Frosting For Frozen Fun”
“When Your Plank Needs Work”
“A Weak Moment”
New Ways to Shave
I’ve been receiving AARP mailings now for 8 years. To add to the insult, it started before I even officially hit the big 5-0. It’s a mystery how they even found me. When we were hunting Bin Laden, we should have put them on the case. If you were born before seat belts were required, they know where you are.
As we get older maybe we do get stuck in our ways. I’ve been shaving the same way for decades. Good News Plus razors with the lubrication strip and the cheapest cream on the shelf. Two blades were always good enough for me, and as far as I was concerned, any white cream would do the job. But shampoo? Nothing but the best for me. Not for what the fancy fluids do for my locks, though I’m sure you’ve noticed the sheen, bounce and manageability. But because when my daughters were all home, they would move on to the next miracle liquid before the last one was gone. I may have a lifetime supply of wounded soldiers. And I smell like a sorority house.
Before Amazon, my wife picked up my shaving supplies at an actual store. Now they’re delivered to my door with a single click. Making it easy has made Jeff Bezos 158.1 billion. But now Harry’s has made it even easier. And better. I don’t even have to click. Not one time. The blades just show up when I need them. They’re probably using a top secret algorithm to calculate the precise speed of my facial hair growth and the corresponding life span of each blade, based the Rockwell rating of my whiskers and my shaving frequency. I may be on the cutting edge of shaving (I’m slightly embarrassed about that pun), but I’m at the dull center of fashion. I still wear socks with my dress shoes. And see no need to sport pants so short that my ankles show. Who decided “floods” were a “look?” Plus, MY suit jackets actually fit ME. When did it become fashionable to look like the “oops” of a Catholic family–the boy who was last in line to wear the First Communion suit, when he was much taller than his older brothers at the same age.
The razors from Harry’s have like 17 blades and they stay sharp for a long time. MBAs who want to sound smart would call this a “core competency.” Me, well, my MBA is a Mop Bucket Attitude, so I’m thinking they should get into runners. Perfectly profiled and optimally sharp (or dull) for the upcoming conditions, delivered right to my door the day before the regatta is even called “ON”. This may be the next move for Amazon. I’d better call a patent attorney to protect my “intellectual property.” When you charge $900/hr., you have to use expensive words. Translation for those of you with an MBA like mine—my “good idea.” If I don’t, Amazon, Google or Apple will most certainly steal my good idea. And I think they’ve got enough money.
All the DN planks I’ve built were “close enough” planks. I’d bend them up following all the conventional wisdom, then start eyeball hand-planing until I thought they looked cool. Then I’d add glass in search of deflection that would match what the fast guys said would be calibrated to my weight, and called it good. But with my C-Skeeter project, I thought I needed to break from my old ways. So, the first thing I did was look up NACA foils. I don’t even know what that stands for, but I stumbled upon the section with foil shapes that were neither lifty or draggy. (These are highly technical terms beyond the scope of this recap). I sized one to the width of my plank, built a router jig to create shape reference cuts, estimated the declining depth of my cuts to account for the ½” tapering of the plank from inboard to outboard, then made lots of sawdust. Not as precise as a CNC router, but a sophisticated shave for me!
Heavy Metal Lightweight
I’ve never done any metal fabrication to speak of. My few attempts with a hacksaw and general purpose drill bits always led to cussing and much shorter bits. But look at me now! I’m cranking out metal like Ozzie with a mountain of Marshalls. He might even give me a bro-nod. Not familiar? Spend some time on any college campus. It’s a form of “subtle” acknowledgement, when you’re too cool to acknowledge anything. Popularized by privileged, white males who grew up in McMansions in the suburbs, but still think the persona gives them street cred. Usually executed with the head slightly cocked to the side, squinted eyes and a subtle backwards tipping of the head. Often paired with the word, “yo.”
OK, so far, my functional and artistic output has only been from aluminum stock, but for a guy with metal phobia, my therapist tells me we’ve just had a breakthrough. And my sponsor, Pat, has been like a cheerleader at a wrestling match—appreciated by the singlet-clad gladiator, but sort of awkward for everyone else. “Gimme a G, gimmie an R, gimmie an I, gimmie an NDR…Grinder…Grinder…will take you far! Man, I can send the shards flying when I hear that one!
With all this encouragement, I may be getting over confident. I’m throwing around terms like 6061-T6, 304 SS, needle bearing, naval bronze, #10 rivet nut, and more into casual conversation. And I just ordered a pair of steel-toed Red Wings and purchased the bulk pack of Gojo with the convenient, dispensing pump. Livin’ large!
Not sure my confidence will extend to stainless, though. I tried to machine stainless once. As in “once-upon-a-time” or “one-time-only.” Your choice. I may have to call on Izzy the metal wizard. He left Oz some years ago and is rumored to live near Pewaukee. Locals say he grew tired of uninvited guests showing up wanting help with this and that. And that the roads were annoyingly bumpy. Some believe him to be Mark Isabell, the DN and A-Skeeter guy, but of course, no one has ever seen the Wizard. Legend has it that he’s got this magical machine he keeps behind the curtain that can cut metal with water. Yeah, I know, right…cutting metal with water? That sounds plausible. Not! But maybe that’s why he’s the Wizard?
At 5:57 a.m. on Wednesday, May 1, Dawn and Daniel Hearn (well, really, mostly Daniel) welcomed into their lives a 7 lb., 10 oz. baby bubble, 58”. It was an difficult labor for Daniel, but he kept pushing through with Dawn never leaving his side (well, really, she was nowhere to be found, not caring much for the smell of epoxy or the massive amounts of dust that are ever-present throughout the process). Women really have it easy when it comes to birthing a bubble. #equality4dudes
The bubble was likely conceived during a wild weekend at the Northwest Regatta. Shortly thereafter, Daniel began to display nesting behavior, surrounding himself with iceboat parts that oddly brought him comfort. Breyer’s Ice Cream observed a sharp increase in consumption in the Madison DMA. And talk about crabby! Dawn figured it was Seasonal Effective Disorder. Nope. The test confirmed it…a bubble in the oven.
If you’re feeling a little hurt, having not received an invitation to the gender reveal party, your pain is unnecessary. The parents are not of the generation that stages such gatherings to create yet another occasion requiring family and friends to bring gifts. Damn Daniel, someone might have brought you the white Vans! https://www.youtube.com/watch?v=_LUX70mXcEE Or carbon fiber twill, 6061 aluminum angle or a 67-tooth sprocket. See, the Millennial Generation isn’t lazy. They’re just better at working the system.
To stay up to date, you must start following the happy couple on Instagram. You know, because everyone wants to see more pictures of their stupid dog (do they have a dog?), what they ate for dinner last night, and now every bowel movement of their chubby little bubble.
Written by: Michał Burczyński
This was my tenth time in the Gold Cup in the USA. The trails were blazed and everything was supposed to go as planned. But then a series of unfortunate events occurred that severely affected my starting plans. The whole thing seemed improbable.
We (the Polish team) had a few days head start in sending our iceboats to the USA, in case of any unforeseen problems. Our equipment got held up at the Paris airport. Our appeals to the shipping company went unheard. And just when things were looking up, our bad luck continued, as the plane which was supposed to bring our gear three days before the start of the Championships, failed to take off because of a malfunction. Continue reading.
Daniel Hearn addresses sitka spruce and the C Skeeter steering system with a little help from friends.
Stopped by McCormick Lumber over my lunch hour Friday to pick up the one additional Sitka board I needed for the two 20 foot chines on the port side of the hull. I was greeted in the parking lot by the Global CEO of the conglomerate, Andy McCormick, who was returning from a high-powered business lunch. He was still sucking Diet Coke through the straw in the Hardee’s cup. I considered Andy a friend, but witnessing that he’s destroying our oceans still using straws, I may have to reconsider. He escorted me to the yard, probably concerned that I would slap as many boards as I could on top of the Swagger Wagon and tear off without paying. I asked him if he could close the overhead door as I searched for the fastest board, as I was a little cold. He asked me if I always wore my wife’s skirt on Fridays?
Saturday morning, thinking my neighbors probably wouldn’t appreciate the sweet howl of my planner in the driveway at 6:30 a.m., I made my way to my office to get the job done in our storage area. Since I don’t have a garage, I’ve sort of commandeered the space. It’s become an ice sailing junkyard; rather appropriate, as the room also harbors our building’s dumpsters. They don’t stink too bad(ly), and it’s a short throw for getting rid of the sawdust. Bonus. I’m probably supposed to put the $10-per-board-foot waste in a bag before depositing it in the non-recyclable dumpster, but we contract with a private service. They’ll pick up anything, unlike the City of Madison that will leave my carts stranded at the curb like a blind date with a nice personality, if they see one leaf poking out of the lid. With the first job of the day complete, back home for breakfast.
Next stop, Nordhaus Boatwerks. Arranged to meet up with Jim to compare different steering systems. After discussing pros and cons, I decided to go with a Renegade style system, but with a wheel (which is not allowed in the Renegade) and extra purchase achieved by attaching blocks to the steering post flanges and dead-ending the lines that go to the steering wheel sprocket back into a bulkhead. Maybe using Spectra rather than cable. I kinda sounds like I know what I’m talking about, right? Well, truth be told, before my remedial session with Professor Nordhaus, I was as clueless and a redneck in a woman’s studies class.
I was also rather uncertain about how I would ultimately attach the decking to the sideboards, so on my way back from church Sunday I gave Jerry Simon a call. It was 10:25 a.m. I was hoping he might be able to stop by my shop in the next week or so. He said, “I can be there by 11:00.” All Jerry needs is an app, and he could be like Uber. Before the eleventh bell faded, the doorbell chimed in and there he was in his well-worn sailing cap, jeans and work boot style shoes. Cheerful as always. I suspect Jerry is on Lombardi time—”if you’re on time, you’re late.” But he probably backed it off a bit for me, seeing as how it was Sunday, and all. And Palm Sunday, no less. Those services go on forever. No need to document with a watch. Every kid squirming in the pew is evidence enough. Of course Jerry didn’t come empty handed. He came bearing gifts of tools. A pneumatic staple gun in a plastic box with every component and staple size precisely labeled. He provided a detailed tutorial that would rival any YouTube sensation, and then showed me how I would put it to work for no-bubble decking and proper scarf joints.
My consultants weekend wouldn’t have been complete without a call to the Heppert Hot Line. All along I’ve thought it was a Call Center in Kingston, but I’m beginning to think the guy on the other end sounds more Minnesotan, than Jamaican. “How in the heck do I get a six foot level to touch three bulk heads on the sides of a curved boat,” I asked. “You don’t,” the guy said, “that’s only by the top rear spine. “Oh,” I replied sheepishly, thinking that maybe I had already sanded a little too much off the small section I had started with. Oh well, may have to shim out that one bulk head some to maintain the smooth curve. He went on to explain something about the flat spine transitioning into compound curves. “Ah…what,” I thought? But for the record, I never took any women’s studies classes.
(Photos below of steering in Meade restoration project at Nordhaus Boatwerks. My C-Skeeter steering will be similar).
Daniel Hearn brings home the second most important part of any iceboating program, the trailer and sees the C Skeeter hull emerge from the parts and pieces.
Frosting For Frozen Fun
When I eat birthday cake (never with ice cream, but I love ice cream…I know, weird) my fork surgically targets the cake part first, leaving mostly frosting for a super sweet, sugar-filled finish. Flower? Corner piece? Ah…yeah…both, please.
It was all frosting at the Spaight Street Syndicate last weekend. Picked up my new C-Skeeter hauler in lower Michigan Saturday morning. Great little trailer company willing to sell direct to consumers and build custom quite economically. On the way there, dropped off a DN mast for repair with Bob Rast. Going to a newbie I assisted getting into a good entry level program. Welcome to the fleet, Vince! Had dinner with my oldest daughter in Chicago and spent the night at her place. I did eat meat on Friday during Lent. Since the Lord can walk on water, he’s certainly an ice boater, so I’m counting on him cutting me some slack.
On Sunday, I got to start dry fitting pieces. It’s been pretty much all cake since I started—planning, ordering, cutting, gluing, carboning, bending, sweeping, swearing, apologizing (to my wife for the excess dust; I don’t think she hears me cussing like a longshoreman). But all of a sudden ,“poof,” it looks like a boat! Frosting for frozen fun is good for my psyche.
Damn, I’m one board short! There I go again with my potty mouth. I’ll have to pay a visit to Andy at McCormick Lumber this week. He’s an Irishman…he won’t mind my language.
The Spaight Street Syndicate C Skeeter build continues. Here’s the latest from Daniel Hearn.
YOUR PLANK NEEDS WORK
I was in NYC last weekend visiting my youngest daughter, Sheridan. She took me to one of these trendy fitness clubs staffed by overly cheerful, Lulumon-clad trainers whose smiles conceal their fondness of torture. It was called The Fitting Room. Their e-blasts ever since will never let me forget.
“Locker room straight ahead,” said the ethnically ambiguous receptionist with the blue buzz cut, plentiful piercings and ink. Admittedly, I was a little groggy, having stayed up way past my embarrassingly early normal bedtime, taking in a comedy show at a club often used by big names for trying out their new material. Chris Rock didn’t show that night.
As I wondered in, there standing right in front of me was a shapely young woman with nothing on but lacy black panties and a party bra. (Not that I was looking, of course, I was with my wife and daughters). As I desperately scanned the area for the silhouette of the guy wearing pants, all I saw were more women. Women in various states of dress. Certain that I had wondered into the wrong locker room, I sheepishly turned to exit trying to be invisible. It must have showed on my Midwestern face as another woman said, “don’t worry, it’s a coed locker room.” “Hmm, I thought, temporarily relieved, until I started thinking about exposing my tighty-whiteys to total strangers, and most of them women. My ladies know I’m a dork, but these women…scratch that…they probably took one look at my dad jeans and concluded, “dork.”
Our class had two wirelessly mic’ed instructors. Not very far into the workout, I became a “project” for the instructor with the British accent and tightly trimmed beard. He said to me, “ Daniel (at least he didn’t call me sir), your plank needs work. I thought to myself, “dude, you have no idea!” Maybe I should send him the pictures?
News from the Spaight Street Syndicate
Look what appeared in the inbox this morning! An update from our other area Skeeter builder, Daniel Hearn, mentioned in yesterday’s post.
At the Northwest Regatta in January, I had the chance to sail the C-Skeeter “Drifter.” I’ve always admired the boat from afar, but resisted the temptation to look into it further. But then this very nice man named Pat (might be an alias) saw me checking her out. He must have sensed an easy target. I didn’t see his white van or puppy, but I’m sure he has both. And he smiled so warmly as he shared his chocolate. Next thing I know I had downloaded the plans and was purchasing Baltic Birch. If Pat is married, I hope his wife is not high maintenance, because Pat is now receiving more correspondence than Dear Abby. No doubt he’s already regretted giving me a taste, but it’s too late to turn back now.
First thing I had to do was extend my DN building table. Check. Now I’m at 20 feet and level. With one foot to spare on each end. Good thing I’m kinda scrawny. And good thing that window is where it is, otherwise this thing would be a permanent fixture in my basement. I measured twice. I’ll get her out. I think? Jack Ripp used to talk about “building in a closet.” Now I appreciate that.
The next thing I did was embrace my deficiencies. I know next to nothing about Skeeters, so I consulted the brain trust who knows everything. Pat Heppert and Bill Buchholz have openly shared their experiences building Pat’s design. And the A-Skeeter guys have shared lots of info with a guy who’s been playing around with those “toy boats” for some time. Many thanks to Jay Yaeso, Kenny Whitehorse, Paul Krueger, Bob Kau, Tom Nichols, Henry Bossett, Steve Orlebeke, Jim Nordhaus, Jerry Simon and others. With their help and tips, I might actually be able to do this. And one more thank you to my brother, Brian, who is providing a second set of hands and valuable structural input pulled from his experience as an architect.
Yesterday, I also had the pleasure of visiting with Bill Mattison, the man who probably knows more about Skeeters than anyone on the planet. Bill is on the mend from a little setback. When I showed up at his room, I met Bill Jr. and granddaughter, Abby, who live in Racine. Told them I love going there for regattas. When I mentioned Cupie Burgers, Well Brothers Pizza and Cliff’s for breakfast, I think they thought I was legit. Well, when I started talking iceboats with Bill, he lit up light the North Beach Harbor lighthouse. I showed him pictures and videos of what’s going on in the shops and Abby giggled when he struggled with the technology. Just listening to Bill exposed how little I know about the Formula One of iceboats. But I enjoyed every second. Bill Jr. said he hadn’t seen his dad so engaged for a long time. That was nice to hear! And what a treasure we have in Madison with so many elder statesmen of ice sailing!
So much for my rambling. Here’s what I’ve scratched off my list so far. With my limited building space, I started on the small stuff first, and when the weather is reasonably warm on weekends, I jump outside to disturb my neighbors making sawdust in the driveway. (Had a visit with a Madison police officer yesterday. Nice guy!)
- Mentioned to my wife in passing that I “might” build another boat. “Really,” she said, as she smiled lovingly. (That may have been a question, but I’m going to punctuate with a period. She’s the best!)
- Bulkheads cut out. (Twice, actually. Decided it wasn’t a good idea to try to make her shorter and skinnier). We’re not into “body shaming” on the near east side. Pretty much anything else goes, however.
- Four bulkheads surrounding cockpit covered with two layers of carbon. (Learned how to do it poorly on the first one. Will cover again to hide my ineptitude).
- Springboard formed, shaped and covered top and bottom with carbon.
- Boom covered with carbon.
- Middle “ladder” lamination of plank complete.
- Stringers and spines cut to size.
- Canopy located and ordered.
- Trailer designed and ordered.
- Sideboards and other plank laminations planed to size.
- Long list of potential names generated. (Class rule that Skeeters have a name on the side).
Next up—edge-gluing boards to get required height or width for sideboards and outside plank laminations. Then, gluing up the plank.
P.S. “Hint. Hint.” Got it, webmaster!