Johnson Boatworks B Class Stern steerer model c 1930
Previous: Minneapolis Play Week
Last week, Jim Gluek shared some family history about his grandfather who raced a Johnson Boatworks-built B Class Stern-Steerer in Minneapolis. Jim has found the perfect place to display the trophy, right next to the model of the stern-steerer that likely dates from around the 1920s.
Jim’s grandfather’s model is a good excuse to take another look at the world of iceboat models which have become highly prized collector pieces. Below are photos of William Bernard and son Carl’s models. (The Bernard Boathouse on Lake Mendota is where iceboat racing began in Madison.) The Wisconsin State Historical Society has a Bernard model iceboat in its collection that Bill Mattison has restored twice. Let us know if you have a model iceboat!
Iceboat models from the William & Carl Bernard family collection
Iceboat models from the William & Carl Bernard family collection
Jim Gluek (Skeeter, DN, and Nite class) came across some family history in the form of this vintage trophy won by his grandfather back in 1927 on Lake Minnetonka. Jim’s grandfather raced a Johnson Boatworks-built B Class Stern Steerer. Jim also mentioned that when conditions are right on Minnetonka, Harry Allen rigs up his vintage B Class Johnson stern-steerer and takes it through the paces. (What iceboater wouldn’t want a shirt with that beautifully designed graphic?)
The Johnson Boatworks was founded by John O. Johnson in 1896 on White Bear Lake in Minnesota. In addition to building iceboats, Johnson was instrumental in scow and other soft water designs. (Johnson Boatworks is now known as White Bear Boatworks. )
Johnson Stern-Steerers have been featured over the years here on iceboat.org. This picture dates from 2013 when Fond du Lac iceboaters Dave and Jeff Lallier gave their then 84 year-old mother a ride in a Johnson B. Note the “banana” spar.
Sail guru Jim Gluek visited the Whitehorse/Krueger Skeeter shop today to look at the recent modifications on PK’s Class A Skeeter boom and spar. Recall that when they last set up the boat in June, it was one of the the hottest days of the year.
PK’s Plank Cam!
How many people can say that a Skeeter is blocking their driveway? Good thing they have a nice neighbor.
Using Lake Baikal’s spring regatta and Minnesota’s Western Challenge as data points, this week marks iceboating’s mid-summer holiday. Ken Whitehorse and Paul Krueger celebrated by setting up Paul’s Class A Skeeter, RAMBL’N, on one of the hottest days of summer to see how the newly built boom looked. Jim Gluek stopped over to look over and talk Skeeter sails.
Yes, that’s a sail from the quiver of Bob Kau’s blue Skeeter now owned by Ken Whitehorse (and will soon carry PK’s number, 165).
Ken Whitehorse and Jim Gluek crunching the numbers of Class A Skeeter sails down at the Krueger/Whitehorse Skeeter Speed Shop.
4LIYC Skeeter sailors Ken Whitehorse, Paul Krueger, and Jim Gluek gathered at the Krueger/Whitehorse Skeeter Shop on Saturday. They brought and measured 8 sails and learned that all were less than 74 square feet. They also spent the day configuring a new Harken cascade pulley system designed by Steve Orlebeke for Ken’s new blue-soon-to-be-red Skeeter. Steve’s design is attracting a lot of interest including some from Daniel Hearn who stopped by to see it being installed. Ken reports that Tom Hyslop will also be changing his pulley system over Steve’s design which uses a combination of Harken block 3238, 3216, and 3215. Iceboat work never stops!
Jim Gluek took some of the photos and sent along this note:
Great day with two legends in our sport. PK and Kenny. Stories of the Skeeter side-car so Kenny could take a crew; two sets of chocks on the plank so you could move the runner in board. One of the most awesome thing about ice boating are the people and the stories over the years.
Paul Krueger and Jim Gluek configure the new Steve Orlebeke designed cascade pulley system.
