by Deb Whitehorse | Aug 22, 2019 | 2019-2020, Home Page, ISA, Spaight St Syndicate
After a short break, Daniel Hearn is back in the saddle, so to speak, with his C Skeeter basement build.
Previously:
“The Inspector”
“Building In The Big City”
“New Ways to Shave”
“Heavy Metal Lightweight”
“It’s a Bubble”
“Simon Says”
“Frosting For Frozen Fun”
“When Your Plank Needs Work”
“A Weak Moment”
Saddle Up, Cowboy
Yeah, I know, it’s been awhile since my last update. In between that work thing and summer pursuits, my time blocks for the shop are short and less frequent, but I’ve been chipping away at the iCe rocket. (No, that’s not the boat name, but it will be a subject of a future blog). My internal mechanicals are now complete, and I’ve been doing lots of sanding on the cockpit carbon to make it look all purdy. I’ll give you the full tour in my next blog.
My nightly ritual this week has been laminating carbon to form the “saddle” which will attach my rocket to the launch pad. At the center point of the plank I laid out a layer of peel ply, then formed the saddle around the plank. I lost track of how many layers, but it was a great way to use up my scraps of both uni and cloth, interspersed with full size pieces. My technical consultant advised that the saddle needed to be stronger than the hull itself, so I just kept adding layers each night until I got to a thickness of about 3/8”. Once there, I rough trimmed the saddle and cut a matching profile in the bottom of my hull to prepare it for glue on. After I glue it on, I’ll reinforce the attachment with carbon fillets on the inside and outside of the hull. The outside fillets will cover up the mounting plates for the titanium axle that holds my exit block in position.
It was noticeably cooler this morning for my sun-up open water swim. Ice is a good way off yet, but the seasons are starting to sniffle. This cowboy is excited to break in a wild mare branded M-177!
Like this:
Like Loading...
by Deb Whitehorse | Aug 12, 2019 | 2019-2020, Home Page, ISA
The Krueger-Whitehorse Skeeter Shop was in full technical mode over the weekend measuring plank deflection and aligning runners.
The Good: Starboard side, 3.4 degrees, not canted.
The Bad: Port side, adjusting to 3.4 degrees, wooden shim is holding plank in position.
Kenny fine adjusting with digital angle finder.
Ken takes a plank measurement.
Kenny checking the runner angle on Paul’s plank.
Load test on Paul’s plank. Note the fresh coat of uni-carbon. The plank was load tested and then modified to match the blue plank’s deflection. Paul’s plank now matches identically with the blue plank deflection.
Like this:
Like Loading...
by Deb Whitehorse | Jul 22, 2019 | 2019-2020, Home Page, ISA
Paul Krueger and Ken Whitehorse have been summer iceboating in the shop, working on their Class A Skeeter programs. Paul send this along:
We had to use the runner straighter jig to flatten Kenny’s stay tubing. It was the heavy wall.
Like this:
Like Loading...
by Deb Whitehorse | Jul 17, 2019 | 2018-2019, Home Page, ISA
Using Lake Baikal’s spring regatta and Minnesota’s Western Challenge as data points, this week marks iceboating’s mid-summer holiday. Ken Whitehorse and Paul Krueger celebrated by setting up Paul’s Class A Skeeter, RAMBL’N, on one of the hottest days of summer to see how the newly built boom looked. Jim Gluek stopped over to look over and talk Skeeter sails.
Yes, that’s a sail from the quiver of Bob Kau’s blue Skeeter now owned by Ken Whitehorse (and will soon carry PK’s number, 165).
Like this:
Like Loading...
by Deb Whitehorse | Jul 15, 2019 | 2018-2019, Home Page, ISA
Pat Heppert, his C class Skeeter DRIFTER, and the Wisconsin Skeeter Assoc. Bottle Trophy
It took a while, but the Wisconsin Skeeter Association Bottle Trophy finally found its way to last season’s recipient Pat Heppert. Looks like Pat had the perfect bottle waiting for it! Pat writes:
It is a great honor to be a part of the legacy of this trophy, and I am eternally grateful to be the caretaker of this for 2019. The artistry and imagination of every one of Harry Whitehorse’s creations are truly impressive. In the background you will also see the new expanded headquarters of the Heppert boat works!
Like this:
Like Loading...
by Deb Whitehorse | Jul 1, 2019 | 2018-2019, Home Page, ISA
3 Nites and John Dennis’ (JD) A Class Skeeter on Lake Pepin at the 2019 ISA Photo: Jann Klin
JD & Tom Nichols in 2012
July 4th signals we’re climbing to the apex of the iceboating off-season (iceboat mid-summer is July 27, more on that later). It’s become an iceboat.org 4th of July tradition, ever since Tom Nichols built the boat, to post Class A Skeeter, EAGLE, in its red, white, and blue livery to commemorate the holiday. EAGLE was born in New Jersey, built and sailed by Tom Nichols. JD purchased the boat in July 2012 and brought her west. Below is a video of EAGLE’S first sail in Minnesota. Both Tom and JD have won the ISA regatta twice, Tom in 2005 and 2006 and JD in 2018 and 2019.
Like this:
Like Loading...
After a short break, Daniel Hearn is back in the saddle, so to speak, with his C Skeeter basement build.
