The Krueger-Whitehorse Skeeter Shop was in full technical mode over the weekend measuring plank deflection and aligning runners.
The Good: Starboard side, 3.4 degrees, not canted.
The Bad: Port side, adjusting to 3.4 degrees, wooden shim is holding plank in position.
Kenny fine adjusting with digital angle finder.
Ken takes a plank measurement.
Kenny checking the runner angle on Paul’s plank.
Load test on Paul’s plank. Note the fresh coat of uni-carbon. The plank was load tested and then modified to match the blue plank’s deflection. Paul’s plank now matches identically with the blue plank deflection.