Madison or Minnesota? Minnesota C Skeeter sailor Pat Heppert posted the photo and question on Facebook over the weekend. Unfortunately, the Madison area must live vicariously through our Minnesota friends for some time. This Wednesday’s forecast of 64F will not help with ice making in southern Wisconsin, but it’s all downhill temperature-wise from then.
The former Jerry Simon boat SIMONIZED IV belongs to Mike Maloney. Pat and Mike sailed on some beautiful ice north of Brainerd, MN, on Round Lake while the MN DN crowd crossed the highway to sail on 4″ of black ice at Gull Lake.
Iceboaters are problem solvers, and Andy Gratton is one of the best. Based upon his experience at Lake Christina near Ashby, MN, last season, Andy figured out a way to make it easier to ferry a Renegade up and down a steep bank. Having “lifted hulls up and down banks one too many times,” he built a helpful device that easily picks up a Renegade hull.
“The crane will easily pick a Renegade (or perhaps a C skeeter hull.) It has a pick point about 11 feet aft of the trailer axle. I think that will do for getting the hulls over the bank we were using last year. As you can see from the photos, the slings and spreader bar works well for a Renegade hull. Both slings are the same length.”
In 1999, Four Lakes Ice Yacht Club member Greg Whitehorse sat down with ice sailing champion Jack Ripp (1928-2019) and discussed Jack’s involvement in ice sailing. The interview originally ran in the club newsletter, Blade Runner. We are fortunate that Greg saved the cassette tape. Jack’s son, Mike, converted it to an electronic format and I added photos and some classic 1960s 8mm film from Bob Clemens.
Previous: Elmer Millenbach Interview Part 1 Elmer Millenbach Interview Part 2 Elmer Millenbach Archives
Here’s the final installation of the Elmer Millenbach interview with historic video footage of Elmer winning a race on Lake St. Clair in the 1940s. Elmer’s wife, Cora Lee, also makes an appearance in the audio track. Cora Lee was vital in building the Renegade fleet, serving as Renegade class Secretary for many years. She also worked race committee at iceboat regattas.
Elmer Millenbach Archives
Here’s the second of the three-part Mystic Seaport Museum interview with Elmer Millenbach, designer of the Renegade class iceboat where he details the different design phases of the Renegade.
