The Original Two Buck Chuck
There were a lot of these “entry level” specials built where ever there was ice sailing. Veteran 4LIYC members Bill Mattison and Jack Ripp have talked about how building sites in Madison provided the best iceboat building materials back in their day.
Tip of the Helmet to Henry Bossett for sending this one along.
The SSS “Pop-Up” Carbon Station Note: Newly installed hazmat barrier protecting laundry room. You’re welcome, honey.
Look what appeared in the inbox this morning! An update from our other area Skeeter builder, Daniel Hearn, mentioned in yesterday’s post.
At the Northwest Regatta in January, I had the chance to sail the C-Skeeter “Drifter.” I’ve always admired the boat from afar, but resisted the temptation to look into it further. But then this very nice man named Pat (might be an alias) saw me checking her out. He must have sensed an easy target. I didn’t see his white van or puppy, but I’m sure he has both. And he smiled so warmly as he shared his chocolate. Next thing I know I had downloaded the plans and was purchasing Baltic Birch. If Pat is married, I hope his wife is not high maintenance, because Pat is now receiving more correspondence than Dear Abby. No doubt he’s already regretted giving me a taste, but it’s too late to turn back now.
First thing I had to do was extend my DN building table. Check. Now I’m at 20 feet and level. With one foot to spare on each end. Good thing I’m kinda scrawny. And good thing that window is where it is, otherwise this thing would be a permanent fixture in my basement. I measured twice. I’ll get her out. I think? Jack Ripp used to talk about “building in a closet.” Now I appreciate that.
Edge-gluing outside plank lamination.
The next thing I did was embrace my deficiencies. I know next to nothing about Skeeters, so I consulted the brain trust who knows everything. Pat Heppert and Bill Buchholz have openly shared their experiences building Pat’s design. And the A-Skeeter guys have shared lots of info with a guy who’s been playing around with those “toy boats” for some time. Many thanks to Jay Yaeso, Kenny Whitehorse, Paul Krueger, Bob Kau, Tom Nichols, Henry Bossett, Steve Orlebeke, Jim Nordhaus, Jerry Simon and others. With their help and tips, I might actually be able to do this. And one more thank you to my brother, Brian, who is providing a second set of hands and valuable structural input pulled from his experience as an architect.
Rough springboard, boom and plank middle “ladder” lamination. Ladder yet to be tapered with my planer. Maybe next weekend. Don’t tell my neighbors! Note: Hull “escape hatch” window above.
Yesterday, I also had the pleasure of visiting with Bill Mattison, the man who probably knows more about Skeeters than anyone on the planet. Bill is on the mend from a little setback. When I showed up at his room, I met Bill Jr. and granddaughter, Abby, who live in Racine. Told them I love going there for regattas. When I mentioned Cupie Burgers, Well Brothers Pizza and Cliff’s for breakfast, I think they thought I was legit. Well, when I started talking iceboats with Bill, he lit up light the North Beach Harbor lighthouse. I showed him pictures and videos of what’s going on in the shops and Abby giggled when he struggled with the technology. Just listening to Bill exposed how little I know about the Formula One of iceboats. But I enjoyed every second. Bill Jr. said he hadn’t seen his dad so engaged for a long time. That was nice to hear! And what a treasure we have in Madison with so many elder statesmen of ice sailing!
So much for my rambling. Here’s what I’ve scratched off my list so far. With my limited building space, I started on the small stuff first, and when the weather is reasonably warm on weekends, I jump outside to disturb my neighbors making sawdust in the driveway. (Had a visit with a Madison police officer yesterday. Nice guy!)
- Mentioned to my wife in passing that I “might” build another boat. “Really,” she said, as she smiled lovingly. (That may have been a question, but I’m going to punctuate with a period. She’s the best!)
- Bulkheads cut out. (Twice, actually. Decided it wasn’t a good idea to try to make her shorter and skinnier). We’re not into “body shaming” on the near east side. Pretty much anything else goes, however.
- Four bulkheads surrounding cockpit covered with two layers of carbon. (Learned how to do it poorly on the first one. Will cover again to hide my ineptitude).
- Springboard formed, shaped and covered top and bottom with carbon.
- Boom covered with carbon.
- Middle “ladder” lamination of plank complete.
- Stringers and spines cut to size.
- Canopy located and ordered.
- Trailer designed and ordered.
- Sideboards and other plank laminations planed to size.
- Long list of potential names generated. (Class rule that Skeeters have a name on the side).
Next up—edge-gluing boards to get required height or width for sideboards and outside plank laminations. Then, gluing up the plank.
P.S. “Hint. Hint.” Got it, webmaster!
-Daniel
Henry Bossett of North Sails retired yesterday after a successful career as a sail maker. He won a few iceboat regattas along the way too. Like the 3 times at DN World Championship (1977, 1981, 1983) and 4 times at the DN North Americans (1982, 1983, 1990, 1993). I’m sure there a some soft water titles as well including an Tornado Olympics trail with fellow DNer Jeff Kent. (Unfortunately it was the boycott year of 1980.)
I’ll never forget the first time Skeeter skipper Tom Hyslop talked about getting a “new Henry” which was the way that Skeeter and Renegade sailors referred to any sail from Henry Bossett.
In the above video, that’s Henry sailing the DN in the famous Chapstick commercial. The sail became a wall fixture at the loft. Cheers to a long career and good luck as you move into this new phase in your life. We all hope to see you out on the ice with your camera, Henry!
From Henry Bossett’s Facebook page. “Last carbon Skeeter main and other carbon ice sails I’ve designed and sewn.”
National Iceboat Authority Web Page
Location: In person at the Elks Lodge 711 Jenifer St, Madison, WI 53703
Time: 6:30 PM
YOU ARE SKIPPER NUMBER
TO ROUND THE MARK SINCE NOVEMBER 1999.
