Via Ken WhiteHorse:
We had the Western Region DN ATV at the Past Champs ICEBOAT shop for repairs. I was just about to cut out the flux capacitator with the blow torch when 4LIYC Renegader and DN racer Chris Gordon walked in with battery boosters and various electrical analysis gadgetry. He says, “Hold your horses there WhiteHorse!” He started at the battery and worked his way forward, testing for open circuits, fried wires, and relays. Within an hour, he found the problems! We turned on the key, and yes, the lights came on! Pushed the green button ✅ yes, the starter engaged! The powerful Ka-ma-sa-ki! rice burner fired to life on the second revaluation! Even so, I still recommend replacing the flux capacitator in the very near future.
Ken WhiteHorse, PAST CHAMPIONS ICEBOAT SHOP
Via Daniel Hearn:
I didn’t know our talented DN World & North American Championship photographer, Cathy Firmbach, could also wax poetic about something as utilitarian as our racing marks. Oh, what an interesting group we are!
But, man, are we rough and tumble. Talk about taking a beating! In spite of Pat Heppert’s efforts to protect the stoic fixtures, they took on more damage than a fraternity house during rush week. Delta, Delta, Delta pledges, no doubt, as they were clearly the recipients of excessive hazing. Good thing we have a bunch of handy types here in the Western Region. We’ll get them patched back together before our next rodeo.
You may have also heard that the Western Region ATV decided to check out during the events, as well. Thanks to Kenny Whitehorse, with help from Chris Gordon, our chariot is back in business, and better than ever. A faulty winch switch fried a couple of fuses. Our machine was dead on the ice in the middle of the lake. A super cool ice fisherman loaned us his ATV to tow our wounded sled back to the pits. We thanked him with a case of beer the next day. He said, “Mama enjoys a cold Lite by a warm fire!”
K. Whitehorse Enterprises insisted that I come over to inspect the work in progress. Fortunately, the fuses saved the wiring from further damage. With most of the plastic off, we agreed it was the perfect time to put on a new muffler. Current muffler has a sizeable hole, and a local shop wouldn’t fix it last year when their mechanic couldn’t just slap on a direct replacement. (Ever wonder what happened to problem solving? They don’t seem to make Kenny Whitehorses and Paul Kruegers these days!) We’re also going to drill a hole through the plastic into the air intake, so we can easily squirt some starting fluid, if our machine is ever grouchy on a particularly cold morning.
Many thanks to Ken and Chris for donating their talents and expertise. I’m going to meet up with Kenny on Friday at the “Past Champions Iceboat Shop” to help with reassembly and to sweep the shop floor. It’s always good to align tasks appropriately with skills!