Looking for some sailing during the
in between times? Like after March when the ice becomes
unsafe but before the soft water season starts. Or late in the fall when
ponds and rinks have frozen but before the lakes are sailable. Or any
other time when a hard, smooth surface can be found. And a little wind.
January 28, 2007 You Tube: Bill Korsgard's K-1
December 18, 2006 K-1 Sails Lake Wingra in Madison
Video from Spain, site of the trials for the
America's Cup. These guys are crew on one of the boats & have come up with
some nice looking designs.
March 19, 2006 The first organized radio controlled model iceboat regatta occurred
February 25 & 26 in Edina, Minnesota under the auspices of the Edina Model
Yacht Club www.emyc.org
The venue on Saturday was at
the beautiful Centennial Lakes complex where the club also sails (and
motors) other model boats during the summer. The location originally several
old gravel quarries which have been sculpted into a series of beautiful
ponds, surrounded by walkways, condominiums & office buildings. In the
winter the ponds are used by large numbers of ice skaters.
We arrived about 9:30 in the morning & started to set up the boats. The
weather was brisk with decent wind coming out of the north & northwest. We
were soon joined by about a dozen EMYC members who were interested to see
more of what Tony Johnson & Alex Raupp have been talking about all this
time. Several boats were brought by Tony Johnson, Harry Allen & myself
The morning evolved into letting people get a feel for sailing the boats &
finding a course that could be readily sailed. Several of us were able to
successfully sail a windward-leeward course. Club sailors included Craig
Young, Alex Raupp, Larry Wheeler, Joe Steele, Bill Poland, Vern Edgerton &
Dale Johnson. Dale also took a bunch of photos, some of which can be seen at
:
http://geoff-s.net/wia/image/tid/18
Since the wind was out of
N-NW, it was shifty because of the theater building just to the north.
Nonetheless, the boats were moving around with decent speeds. More than one
spectacular crash occurred, including at least one by the author.
As the day progressed, the wind seemed to be letting up a bit, so we decided
to change to course to a reach-reach course in the interest of keeping the
boats moving for the races. By this time in the afternoon, the ice skaters
were starting to encroach, but fortunately the club had arranged for the
North Pond to be roped off. Many of the skaters stopped to watch the races
or ask questions. When we finally got around to racing, the contestants were
Tony Johnson sailing his modified DN, Harry Allen sailing his Nite & Bill
Korsgard sailing his K-1. Six races were held before the sun started to cast
a cold shadow & we called it a day. Craig Young hung around to help pickup &
we retired to the nearby Fudruckers restaurant where we warmed ourselves
with some warm burgers & cold beverages. The competitors then retired to
their respective shops to "lick their wounds" by repairing damage &
sharpening runners.
Sunday morning started off with very brisk single digit temps, bright sun &
a depressing lack of good wind. After breakfast & some checking the net for
weather forecasts, the wind appeared to have picked up a bit. We decided to
head over to a skating rink in the southeast suburb of Chanhassen where the
site offered less obstructions. Tony & I were met by Alex & his 5 year old
daughter Sydney. The wind showed promise with some gusts around 10 mph, but
it was still erratic at times. The pond was sort of small & rough at one end
but at least it was wide open. Harry showed up & we had 5 more races, again
on a reach-reach course. They were interesting races in that all out speed
wasn’t the most important thing compared to keeping control on the hard ice
with sharp turns .
As far as we know, this was the first time such an event has ever been held
worldwide. Everyone seemed to have a good time. I want to thank Tony
Johnson, Alex Raupp & the Edina Model Yacht Club for organizing the event.
We hope that it will continue & grow in the future.
Final results for the regatta were:
1)US 66 Bill Korsgard
2)US 81 Tony Johnson
3)US 105 Harry Allen
October 5, 2005
Model Land
Yacht
Regatta at Rockford,
Illinois pm October
8-9 2005
September 12, 2005
Via Bill Korsgard: "...here's my new wing mast rig set up on my
"K1-SS" model land yacht. If anyone wants more pix with more
detail, let me know &
I'll send it out."
November 2003
K-1 Plans Now For Sale
K-1Model Ice & Land Sailor Plans Proven design with a documented speed record of over 33
mph.
Plans consist of 2 detailed sheets and written instructions.
Contact Bill Korsgard at 608-233-8166 or wwkorsgard@charter.net Price $25 + $2shipping
and handling
January 21, 2003:
The K-1 sports a new sail.
December 21, 2002: RC SPEED CHALLENGE
Bill Korsgard has issued a friendly challenge to see what sort of documented
speeds with RC hard surface sailing craft. Bill has documented
a GPS speed of 27.1 mph, barely beating Tony Johnson's 26.8 mph. It was
filmed and witnessed by Geoff Sobering. The winds were in the teens with
gusts, necessitating the use of a small C rig, which broke in half before
the day was over. Bill was a little disappointed that the boat didn't reach
into the 30 mph mark, as it certainly appeared to be going that fast.
Perhaps with less wind and his larger Weber A mast, the K-1 will reach the
goal of 40 mph.
Bill proposes that the standards of such unofficial speed records be
kept informal for simplicities sake. This is being done with the hopes of
spurring interest in the hobby. Speed can be documented with radar, GPS, or
timed runs over a measured course. Only one witness is needed; we're on the
honor system. Photographic documentation is nice but not necessary. If
anyone wants to add other criteria, they are more than welcome. Bill
"looks
forward to others taking up the challenge & beating K-1's
"record"."
UPDATE: December 22, 2002
The K-1 set another record of 33.3 mph. "Bigger sail with ballast &
a lot of slop in the stays. Blowing like snot."
See video of the the
K-1 in action on
Geoff Sobering's ice boat web page.
The K-1
By Bill Korsgard
4LIYC Renegade 441
As a kid, I recall making wind driven sleds out of popsicle sticks
and paper sails to slide downwind across crusty snow cover.
I’d forgotten about this until a couple of years ago when I began to
consider the possibilities of a more sophisticated radio controlled unit.
The real inspiration came through the internet from the sites of Tony
Johnson, Bob Costa, Robert Weber, and Kris Seluga, as well as some guys in
Britain. With some experience in
building RC sailboats, I figured I could embark on a design of my own.
The K-1
The basic concept was to create a potentially fast craft at nominal
expense using basic hand and shop tools, as well as readily available off the shelf components. Speed would come from having a large
enough platform to allow sufficient sail height to reach into less
disturbed air. The dimensions of the K-1 design (52 "L X
39" W X 69" H) put it into the IRCSSA Class III category.
Minimal rolling resistance led to the choice of 3" (76 mm) rollerblade
wheels, although softer foam model airplane wheels are used by others and
may work better on some surfaces. Ice runners can also be used
successfully, but when the ice is that good, I’ll probably be in my Renegade!
Close-up of wheel assembly
The hull is constructed of 1/8 " (3mm) Baltic Birch plywood on the bottom, with
spine running through the center. The hull skin is simply paper
backed birch veneer. The plank is 3 laminations of the 1/8" ply (and/or
1/8" wood) formed with a 1" camber. Everything is held
entirely together with West System ® epoxy. No springboard was
included at this time, which does not seem to result in any loss of
control, but could be added later if needed.
Hull & plank
The steering gear and wheel/runner chocks are cut out and bent from
.064" #6061 aluminum. The mast sections are hobby store
streamline aluminum tubing (3/4" and 5/8") which will telescope
together into each other for a total mast height of about 67". The
mast rotates freely in the unique boom with integral gooseneck and vang.
Stress points on the mast are filled with epoxy. The mast’s
slenderness results in obvious bend, allowing considerable gust loading
without capsize similar to today’s DNs.
Sail fabric is simply wrapped around the mast and boom and fastened with 2
sided sail-maker’s tape. No stitching is involved.
Draft in the sail is induced with 2 to 4 % luff curve forcing more
material into the shape. Several sail sizes and ballast are
need for differing conditions. Stays consist of 50# fishing
line with swivels and adjusters (bowsies).
Cutting the sail
The electronics are the basic RC transmitter and servo kit, although a
stronger sail winch serve (I use a Futaba 3802) is needed for better
performance and longevity. Steering is connected with a bicycle cable,
although a 2 wire pull-pull system is being considered.
Servo
Sailing performance thus far has been a lot of fun. In a decent wind
it appears to get up and go, maybe 30 mph. Time trials have not been
rigorously carried out, but maybe one of these days I’ll tape a small
GPS to the plank and see what happens. High winds can result in some
crabbing and an occasional spin out, but softer wheels appear to
give better grip. Some slippage is preferable to capsize, so it may
not be all bad. Details of the design & sail shape are being fine
tuned, but the true test will come in competition against others. It's time
to go racing!!!
As the design is refined, accurate plans are being drawn up and will be
available Fall 2002. Contact 4LIYC Renegader Bill
Korsgard with questions or input.
Ivanpah 2004 (For more photos taken by
the New Zealanders, go www.nzssa.com)
Photo Credits: Bill Korsgard
Skeeter sailor Bill Dale's new
land yacht made by Alan Wirtanen
Alan Wirtanan
The ice of land yachting.
Here's John Eisenlor's wing land
yacht after it was going real fast and a nico-press let go &
dropped the new wing.
(Famous Ice Boat Saying: They always go the fastest
before they break.)
Here's the New Zealand Blokart
group led by the designer/builder with his friends from the islands,
along with a bunch of American blokes, totaling about 25.
Robert Weber's Scirocco
tied down for the night in anticipation of predicted 45 mph winds.
The "Fed 5" made by
S&R Marine, Pewaukee, Wi USA
Bill Korsgard's "K-1" RC
land yacht, who placed 2nd in the regatta, with a high wind rig.
